GE 21006 - Manual (Page 18)

18
A
NSWERING A
C
ALL
1. Pick up the handset and press the talk/callback button on the handset.
2. When finished, press talk/callback to hang up.
NOTE: Adjust the handset volume by pressing the cid/vol (up or down arrow)
button during a call.
C
ALL
T
IMER
After you press the talk/callback button on the handset, the built-in call timer
shows on the display and begins counting the length of time of the call.
P
RE
-D
IALING
Make sure the phone is OFF (not in TALK mode).
1. Enter the telephone number you wish to call. The telephone number
shows in the handset display.
2. Press the talk/callback button on the handset and the number
automatically dials.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the DEL
soft key until all of the digits are erased.
A
UTO
S
TANDBY
If you place the handset in the cradle while the handset is off the hook
(during a call), the handset automatically disconnects the line.
R
INGER
O
N
/O
FF
S
WITCH
The handset ringer switch is pre-set to ON.
1. Press the ringer button on the handset and RINGER ON 1ON 2OFF
shows in the display (if the original ringer setting is ON).
2. Use the touch tone pad to select 1ON or 2OFF, or use the cid/vol (up or
down arrow) button to select 1ON or 2OFF.
3. Press the OK soft key to save your selection, or press the EXIT soft key
to retain the original setting.