GE 21006 - Manual (Page 31)

31
3. If the number will not dial as shown, press the format/conference
button. Repeat if necessary, until the correct number of digits show in
the display.
4. Press the talk/callback button on the handset. The number dials
automatically.
NOTE: If the number is corrupted, such as a number in a name or an
alphabetical character in a number, you will hear an error tone at the handset
and the number won’t dial.
D
ELETING THE
C
URRENT
C
ALLER
ID R
ECORD
To delete a Caller ID message:
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (up or down arrow) button to display the Caller ID record
you want to delete.
3. Press the DEL soft key. The display shows DELETE CALL ID?
4. Press the OK soft key to erase the record. The display shows DELETED.
NOTE: Press the EXIT soft key on handset to return to the standby mode.
D
ELETING
A
LL
C
ALLER
ID R
ECORDS
To delete all the Caller ID names and numbers from the Caller ID memory:
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (up or down arrow) button to scroll to any Caller ID record.
3. Press DEL soft key for two seconds. The display shows DELETE ALL?
4. Press OK soft key to erase all of the current CID records. The
display shows NO CALLS.
NOTE: Press the EXIT soft key on the handset to return to the standby mode.