Garmin Rino 130 - Manual (Page 46)

32
Reference
Navigation Page
NAVIGATION PAGE OPTIONS
Sight ‘N Go - Use the Sight ‘N Go feature to locate a landmark visually and then lock in a
magnetic heading to it.
Stop Navigation - Cancels navigation (“Grayed out” or disabled unless you are navigating on a
Goto, Track, or Route.)
Bearing Pointer/Course Pointer - Toggles between Bearing (always directed at destination)
and Course (distinctive with dots across center of compass, shows amount of correction needed
to be back on course.)
Show Data Fields/Big Compass - Toggles to display data fields on the right side of the dis-
play or removing the data fields and showing a larger compass.
Calibrate Compass - Calibrates the electronic compass. Follow the on-screen instructions.
Restore Defaults - Returns options and data field choices to factory designations.
To change data fields:
1. Use the THUMB STICK to highlight the desired data field and then press it IN to display the
list of data options.
2. Select the desired option from the list and press the THUMB STICK IN. The list of data field
choices may be found on page 26 and definitions may be found in the Appendix.
Navigation Page with
Bearing Pointer and
Big Compass..
Navigation Page Option
Menu