Garmin Rino 130 - Manual (Page 59)

45
Features
Waypoints
Mark Waypoint Page
Symbol
Waypoint
Name
Waypoint
Details
Mark Waypoint Page icon
WAYPOINTS
There are numerous ways to create, edit, and use waypoints. Using the Mark Waypoint
Page and the Find ‘N Go Menu are two common pages for creating and editing waypoint. You
can also create a waypoint using the Map Page. The Rino 130 holds up to 500 waypoints.
Mark Waypoint Page
The Mark Waypoint Page allows you to mark and record your current location as a
waypoint and appears with a graphic name block (man with a flag) that displays the assigned
number for that waypoint and a waypoint symbol.
To mark your current location and open the Mark Waypoint Page:
1. Press and hold the THUMB STICK IN until the Shortcuts Menu opens.
2. Highlight ‘Mark Waypoint’ and press the THUMB STICK IN. The Mark Waypoint Page
opens. You can also access this page by highlighting the Mark Icon on the Main Menu
Page and pressing the
THUMB STICK IN.
3. To save the waypoint, highlight ‘OK’ and press the THUMB STICK IN. If you do not want to
save it as a new waypoint, press the PAGE button to cancel.
To change Mark Waypoint Page Options:
• To change the name of the waypoint, use the THUMB STICK to highlight the waypoint
name field.
• To assign an identifying symbol to a waypoint, use the THUMB STICK to highlight the
symbol block just above the waypoint name.
• To view the waypoint details, highlight the details field and press LEFT or RIGHT on the
THUMB STICK to change to the next data field.