Garmin Rino 130 - Manual (Page 97)

83
Features
chosen, you must correct for the Magnetic Variation. The Electronic or GPS compass uses the
North Reference setting to create a bearing.
Switch to Compass Heading when Below - Enter the desired speed for the Rino 130 to
switch from using GPS to using the compass for guidance.
For more than… - Enter a time limit to switch to the compass. When you travel at the speed
entered above for the time entered here, the Rino 130 switches from GPS to the compass.
To select either option:
1. Highlight the field and then press the THUMB STICK IN to display the options.
2. Highlight the option and press the THUMB STICK IN to activate.
Interface Setup Page
The Interface Settings Page allows you to choose from different input/output serial data for-
mats. This feature is used when connecting to external NMEA devices, a DGPS beacon receiver,
a personal computer, etc. See the Appendix for using the Rino 130 with MapSource.
To access the Interface Setup page:
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the Interface icon to open the Interface Setup page.
The available interface formats are:
Garmin - The proprietary format used to exchange waypoint, track, and map data with a PC.
Use this setting for transferring data when using a MapSource product.
Setup Page
Interface Setup icon
Interface Setup Page