Garmin Rino 130 - Manual (Page 87)

73
Features
Proximity Page
Proximity Waypoints Page
Proximity Page icon
Proximity Points
The Proximity Page lets you define an alarm circle around a stored waypoint/contact posi-
tion, and can be used to help you avoid dangerous areas or to alert you when you have strayed
too far away from other Rino users. Up to ten waypoints may be listed, with a maximum alarm
radius of 99.99 nautical or statute miles or kilometers. If entering a proximity alarm circle, a
‘Near Proximity Point <name>’ message appears. If leaving a proximity alarm circle, a ‘Leaving
Proximity Point <name>’ message appears.
To access the Proximity Page:
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Proximity.
To add a proximity point:
1. Use the THUMB STICK to highlight an empty space on the Proximity list and press the
THUMB STICK IN to display the ‘Find ‘N Go’ screen. Highlight an item from the list and
press the THUMB STICK IN to open the item.
2. From the Review Page, select ‘Use’. Press IN again to begin entry of the proximity radius.
Use the THUMB STICK to enter a distance and press IN.
To clear one or all proximity point(s) from the list:
1. To clear a single alarm, use the THUMB STICK to highlight the proximity point to clear and
press IN. Choose ‘Remove’ and press IN.
2. To clear all proximity waypoints, highlight the Option Menu and press IN. Choose
‘Remove All’ and press the THUMB STICK IN.
To turn proximity alarms on or off:
1. Use the THUMB STICK to highlight ‘Proximity Alarms’ and press IN to place a check mark.