Grizzly G0703 11 User Manual
Page 16
-16-
Model g0703 (Mfg. since 8/09)
figure 11. installing the hand rail.
10. With the help of an assistant, raise the dust
collector to the upright position, and install
the handle (
figure 11) with (4)
5
⁄
16
"-18 x
3
⁄
4
"
hex bolts and
5
⁄
16
" washers.
figure 12. Filter-element crank installation.
11. Engage the filter-element crank (figure 12)
with the shaft, and secure it in place with one
5
⁄
16
"-18 x
3
⁄
4
" hex bolt and one flat washer.
12. Attach the casters to the bottom of the drum
using (4)
3
⁄
8
"-16 hex nuts, (4)
3
⁄
8
" flat washers,
and (4)
3
⁄
8
" lock washers (
figure 13).
figure 13. dust collection drum casters installed.
figure 14. lid latch installation.
13. Attach the lid latches to the side of the drum
extender using six #10-24 x
3
⁄
8
" phillips head
screws and #10-24 nuts as illustrated in
figure 14.
Note: To avoid bag snags, face the screw
heads located inside of the drum with the
shanks facing outward, as illustrated in
Figure
14.