Grizzly G0703 11 - Manual (Page 23)

Model g0703 (Mfg. since 8/09)
-23-
SECTiON 5: OPERaTiONS
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
if you ultimately plan to design and build
your own dust collection system, WE
STRONGLY RECOMMEND that you do as
much research as you can. Regardless of
the content in this section, Grizzly industrial
will not be held liable for any accidents or
workmanship related to the dust collection
system you build.
General Operation
this cyclone dust collector creates a vortex of
incoming air that extracts heavy wood chips
(
figure 28) and large dust particles and drops the
them into the steel drum below, which is lined with
a plastic bag.
figure 28. Model g0703 flow.
the remaining fine dust ( figure 28) travels
past the impeller and is then caught by the filter
cartridge and is deposited in the plastic collec-
tion bag below. this filter is made of spun-bond
polyester, which catches 99.9% of particles from
0.2 to 2 microns in size, and is pleated to provide
maximum surface area for efficient airflow.
to maintain CFM during heavy dust collection
operations, the cleaning hand crank is manu-
ally rotated and the internal filter flaps knock off
caked-on dust into the plastic collection bag,
which is fitted to the bottom of the filter canister.
incoming
Wood
Chips and
Fine dust
Fine
dust
Wood
Chips
always guard against
static electrical build up
by grounding all dust col-
lection lines.