Grizzly 1 1/2 HP Cyclone G0703 - Manual (Page 38)

-36-
Model g0703/g0703p (Mfg. Since 3/12)
4. remove the twelve hex nuts from the blower
housing base, as shown in figure 54.
figure 54. removing hex bolts from canister
assembly.
5. remove the canister assembly from the
blower housing.
6. Carefully lift the filter out of the canister
assembly, as shown in figure 55.
7. insert a clean/new filter into the canister
assembly, then re-install the canister to the
blower housing base and cross support by
repeating the previous steps in reverse.
8. Secure a fresh collection bag with the bag
clamp.
figure 55. removing filter.