Grizzly H7760 - Manual (Page 16)

-14-
H7760 2" x 27" Belt Sander & 6" Grinder
SECTION 4: OPERATION
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
All grinding wheels have the potential of
breaking apart during operation, causing
serious personal injury or death! Always
stand to the side of the grinder when turn-
ing it ON and wear the proper safety equip-
ment to protect yourself.
NOTICE
This section provides only a basic descrip-
tion of grinder/sander applications. There
are many different grinding wheels and sand-
ing belts available for your grinder/sand-
er. WE STRONGLY RECOMMEND that you
read books, trade magazines, or get formal
training to maximize the potential of your
machine.
Once mounting is complete and adjustments are
done to your satisfaction, you are ready to test the
machine.
Test Run
Disconnect power from
the machine when per-
forming any maintenance,
assembly or adjustments.
Failure to do this may
result in serious personal
injury.
To test run the grinder/sander:
1. Plug the machine into the power source.
2. Stand to the side of the grinding wheel and
turn the grinder ON.
The machine should run smoothly with little
or no vibration or rubbing noises. Strange or
unusual noises should be investigated and cor-
rected before operating the machine further. If
the machine seems okay, stay out of the line of
rotation of the grinding wheel and let it run for 1-
2 minutes to make sure the wheel is structurally
sound.
If you cannot easily locate the source of an
unusual noise or vibration, contact our Technical
Support department for help.
Using this machine pro-
duces dust which may
cause allergic reactions
and respiratory prob-
lems. Protect yourself by
wearing safety glasses
and a respirator dur-
ing the entire operation
process. DO NOT wear
gloves while operating
this machine as they can
be caught in the rotating
surfaces and become
entangled. Failure to
comply with this warn-
ing may result in serious
personal injury.