Replacing belts – Grizzly H7760 User Manual

Page 22

Advertising
background image

-20-

H7760 2" x 27" Belt Sander & 6" Grinder

Many belts are available with different grit sizes.

To remove/replace a sanding belt:

1. DISCONNECT THE MACHINE FROM THE

POWER SUPPLY!

2. Remove the star knob from the right-hand

sanding belt cover as shown in

Figure 16,

and remove the cover.

Replacing Belts

Figure 16. Star knob removed.

Figure 18. Removing sanding belt.

3. Loosen the sanding belt tension knob, as

shown in

Figure 17.

4. Pull the sanding belt tension knob down

with one hand and work the sanding belt off
the rollers with the other hand as shown in

Figure 18.

5. Install the new sanding belt in the reverse

order of removal and replace the belt cover.

6. Track the new sanding belt as shown on

Page 13 BEFORE turning the machine ON.

Figure 17. Sanding belt tension knob.

Advertising