GE ZV850 - Manual (Page 3)

3
Design Information
36" Island Vent Hood
Model
ZV850 Model
Available
Required
Accessory
This vent hood is designed to be used in
vented ceiling mounted installations.
NOTE: Accessories to meet proper ceiling
height are required to complete the installation.
The vent hood must be installed 24” min. and
30” max. above the cooking surface. 25-1/2” is
recommended for best venting performance
and to insure that the duct cover meets the
ceiling. The cooking surface should be at least
36” above the floor. Installation will be easier if
the vent hood is installed before the cooktop
and countertop is installed. Product
Dimensions
ZX858 – For 8 ft. ceiling height.
This kit includes decorative duct covers and
support frames to reach an 8 ft ceiling height.
ZX859 – For 9 ft. ceiling height.
This kit includes decorative duct covers and
support frames to reach an 9 ft ceiling height.
* The distance between the cooking surface and the bottom of the
hood must be at least 24” and up to 30” The 25-1/2”
recommended installation height, above the standard 36”
countertop, will insure duct cover fit to the ceiling.
ZX8510 – For 10 ft. ceiling height.
This kit includes decorative duct covers and
support frames to reach a 10 ft. ceiling height.
Order the required accessory at the same time
as the vent hood and have on site before
installation.
*25-1/2" Recommended
36" Reference
*26-1/4" for 8 ft. Ceiling
Using ZX858 Accessory
38-1/8" for 9 ft. Ceiling
Using ZX859 Accessory
50-1/8" for 10 ft. Ceiling
Using ZX8510 Accessory
*Height
to Ceiling
8-1/4"
35-3/8"
27-1/2"