Grizzly G9744Z - Manual (Page 22)

-20-
G9744Z Metal Cutting Bandsaw
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
This bandsaw is for trained operators only.
WE STRONGLY RECOMMEND that you read
books, trade magazines, and get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Vise
Always turn the saw OFF and allow the blade
to come to a complete stop before using the
vise! Failure to follow this caution may lead
to injury.
Figure 13. Workholding options by material
shape.
The vise has a quick release feature that allows
jaw width to be quickly adjusted when changing
from one sized material to another.
To rapidly change the vise jaw gap:
1. Turn the handwheel counterclockwise to
relieve any pressure on the vise jaw.
2. Pull or push the jaw in the desired direction.
3. Finish tightening the jaw against the workpiece
with the handwheel.
Note: Figure 13 shows correct methods of
holding different workpiece shapes.