Cleaning/lubricating – Grizzly G0456 User Manual
Page 31
G0456 Variable Speed Wood Lathe
-29-
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
SECTION 6: MAINTENANCE
Cleaning the Model G0456 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and
steel with a non-staining lubricant after cleaning.
Lubricate the unpainted cast iron surfaces on the
bed by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces. We recommend
using products such as G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 for lubricating the
unpainted cast iron on your machine.
Cleaning/Lubricating