GE 27907 Series - Manual (Page 21)

1
5. After the time is set, the real time clock will be displayed
on the handset within 1 minute.
NOTE: You must set the day manually. You may
choose to set the time manually as well, although
the time is automatically transmitted by your
local phone company as part of Caller ID service.
If you subscribe to Caller ID service, the current
time is set automatically when you receive your
first CID record.
Speaker Volume
Use the volume (5 or 6) buttons to adjust speaker volume
on the base to a comfortable level. L1 is the minimum
speaker volume and L8 is the maximum.
Voice Instruction
If you need additional assistance, press the review button in
standby mode and follow the voice instructions.
Recording the Outgoing Announcement
For best results when recording, you should be about
nine inches from the microphone, and eliminate as much
background noise as possible.
You may record an outgoing announcement in the
answerer or choose the default for your current outgoing
announcement.