GE 27907 Series - Manual (Page 36)

6
. If you select 1YES, press the mute/program button. HOLD
BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET
PROGRAM shows in the display. (Your handset should be
held near the base during registration process.)
5. Press and hold the page button on the base unit, the
charge/in use indicator flashes. Press the handset mute/
program button. REGISTERING shows in the display.
HANDSET X REGISTERED shows in the handset display,
where X is the handset number. You may now rename
your handset. (Refer to Step  &  of Handset Name
Section)
NOTE: IF you are re-registering the handset
through the handset menu; to rename your
handset you must go to the Handset Name
Section and start from the beginning step.
De-Registration
De-registration cancels registration. During the de-
registration process, keep the handset near the base.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
DEREGISTRATION sub-menu.
. Press the mute/program button to enter the menu.
DEREGISTRATION 1YES42NO - - - shows in the display
The default setting is "NO".