GE 27907 Series - Manual (Page 79)

79
Unit beeps
• Clean the charging contacts on the cordless handset and
base charge cradle with a soft cloth or an eraser.
• See solutions for “No dial tone ” on previous page.
• Replace the battery.
Memory dialing doesn’t work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and
cordless handset
• Unplug the power adaptor from the electrical outlet and
the back of the base. Remove the handset battery. Wait
for 0 seconds and plug the power adaptor back into the
base and electrical outlet. Reconnect the battery and
charge for 16 hours.
Caller ID Solutions
No Display
• Charge the battery (for 16 hours). Or replace the battery.
• Make sure the unit is connected to a non-switched
electrical outlet. Disconnect the power adaptor from the
base and reconnect it.