GE 27907 Series - Manual (Page 33)


. Press mute/program button to enter the menu. RING TO
ANSWER 3 4 5 6 TS shows in the display.
. Use the caller ID-volume ( 6 or 5) button to scroll to the
your selection. The default setting is 5.
. Press the mute/program button to confirm. You will hear
a confirmation tone and the new setting shows in the
display.
NOTE: If you select Toll Saver (TS) the unit
answers after the 3rd ring if there are NEW
messages, OR the unit answers after the 5th
ring if there are NO new messages. This allows
user to access their answerer from another
location and then hang up after 4 rings to save
long distance charges.
Security Code (for answering system)
You can access the answering system from a tone dialing
telephone in another (remote) location. The security code
is required for remote access, and it prevents unauthorized
access to your answering system.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
SECURITY CODE sub-menu.
. Press mute/program button to enter the menu. SECURITY
CODE 1 2 3 shows in the display.