GE 27907 Series - Manual (Page 77)

77
Handset Sound Signals
Signal Meaning
A long warbling tone Signals an incoming call
(with ringer on)
Three short beeps
Page signal
(several times)
One beep every 7 seconds
Low battery warning
Troubleshooting Guide
Telephone Solutions
No dial tone
• Check or repeat installation steps:
Make sure the base power cord is connected to a working
electrical outlet.
Make sure the telephone line cord is connected to the
base and the wall jack.
• Connect another phone to the same jack. If it doesn’t
work, the problem might be your wiring or local service.
• The handset may be out of range of the base. Move closer
to the base.
• Make sure the battery is properly charged (for 16 hours).
• Make sure the battery pack (in the handset) is properly
installed.