Gateway FX542X - Manual (Page 62)

CHAPTER 5: Upgrading Your Computer
56
4 Remove the thumbscrew holding the card reader in the
drive bay.
5 Slide the card reader out of the case.
6 Slide the new card reader into the bay from the front of
the case, then slide the drive release latch forward to lock
the drive into place. You do not need to replace the
thumbscrew because it was originally installed for
shipping purposes.
7 Connect the new card reader cables, using your notes
from Step
3 .
8 Replace the front bezel by following the instructions in
“Replacing the front bezel” on page 50 .
9 Replace the side panel by following the instructions in
“Replacing the side panel” on page 50 .
Important
The color and shape of your replacement reader's front cover may
vary from your original reader.
Thumbscrew
8513162.book Page 56 Tuesday, May 20, 2008 4:09 PM