Gateway FX542X User Manual
Page 83
Advertising
www.gateway.com
77
14
Release the processor from the old system board by
pushing down on the lever, then lifting the lever
completely up.
15
Remove the processor from the old system board.
16
Install the processor onto the new system board making
sure that Pin 1 on the processor (indicated by the
silk-screened arrow on the corner of the processor)
aligns with Pin 1 on the processor socket (indicated by
the absence of a pin hole in the processor socket), then
return the lever to its locked position.
8513162.book Page 77 Tuesday, May 20, 2008 4:09 PM
Advertising