Gateway FX542X - Manual (Page 67)

www.gateway.com
61
6 Slide the new fan into the fan mount.
7 Insert the tabs on the rear of the fan mount into the slots
provided, then rotate the mount into place. The mount
should lock into place.
8 Reconnect the fan cable to the system board.
9 Replace the fan cover.
10 Replace the side panel by following the instructions in
“Replacing the side panel” on page 50 .
Caution
Be careful not to catch the wires connecting the power button to
the system board when rotating the fan mount. A notch has been
provided for routing these wires.
8513162.book Page 61 Tuesday, May 20, 2008 4:09 PM