Gateway FX542X - Manual (Page 74)

CHAPTER 5: Upgrading Your Computer
68
3 Remove the screw that secures the front I/O assembly
to the computer, then remove the I/O assembly.
4 Remove the screw that secures the front I/O panel board
to the computer, then remove the I/O panel board by
pushing it toward the back of the computer.
5 Disconnect the cable from the old I/O panel board and
connect it to the new I/O panel board.
6 Insert the new I/O panel board into the computer, then
replace the screw.
7 Place the front I/O assembly onto the computer, then
replace the screw.
8 Replace the front bezel by following the instructions in
“Replacing the front bezel” on page 50 , then replace the
side panel by following the instructions in “Replacing the
side panel” on page 50 .
Screw
Screw
8513162.book Page 68 Tuesday, May 20, 2008 4:09 PM