Gateway FX542X User Manual
Page 72
Advertising
CHAPTER 5: Upgrading Your Computer
66
4
Loosen the four screws that secure the heat sink to the
system board, then remove the heat sink. (The screws
cannot be completely removed.)
5
Release the processor by pushing down on the lever,
then lifting the lever completely up.
Caution
The heat sink has Thermal Interface Material (TIM) located on the
bottom of it. Use caution when you remove the old heat sink or unpack
the new heat sink so you do not damage the TIM.
Screws
Screws
8513162.book Page 66 Tuesday, May 20, 2008 4:09 PM
Advertising