GE 25860 - Manual (Page 16)

16
2. When finished, place the handset back in the cradle, or press the talk/
callback button again.
IMPORTANT: Because cordless phones operate on electricity, you should have at
least one phone in your home that isn’t cordless in the event of a power failure.
Call Transfer
During an external call, you may transfer the external call to another
handset.
1. Press the transfer/answerer button on the originating handset.
TRANSFERRING shows in the display.
2. Press the transfer/answerer button or talk/callback button on receiving
handset to answer the call.
NOTE: To cancel the call transfer, you may press the *exit or transfer/
answerer button on the originating handset.
In Use Indicator
When the handset is ON (in TALK mode), the talk/callback button lights
up when the handset is taken off-hook. The charge/in use indicator on the
base is lit. During an incoming call, the in use indicator on the base and the
handset talk/callback button flash on and off. When the handset is taken
off-hook, talk/end/callback button illuminates and remains on until handset
is put on-hook.
Redial
1. Press the talk/callback button on the handset.
2. Press the redial button to redial the last number you called (up to 32
digits). If you get a busy signal, and want to keep dialing the number,
press redial to dial the number directly.
Flash
Use the flash/prog button on the handset to activate custom calling
services, such as call waiting or call transfer, which are available through
your local phone company.
TIP: Don’t use the talk/callback button to activate custom calling services such
as call waiting, or you’ll hang up the phone.