GE 25860 - Manual (Page 27)

27
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the
battery 5-2548 that is compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before
you replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from
the jack inside the battery compartment and remove the
battery pack from the handset.
4. Connect the new battery pack and insert it in the
battery compartment.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset charge cradle to charge. If you don’t
charge the handset battery properly (for 16 hours) when you first set up
the phone and/or when you install a new battery pack, the battery’s long-
term performance is compromised.
NOTE: If the battery is not properly installed in the handset, or if the battery
pack is not properly connected to the jack inside the battery compartment, “NO
BATTERY” shows in the display when the handset is placed in the base cradle.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the battery listed in
the User’s Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
NOTE: The RBRC seal on the battery used in your ATLINKS USA, Inc.
product indicates that we are participating in a program to collect and
recycle Nickel Cadmium batteries throughout the United States.
Please call 1-800-8-BATTERY for information or contact your local
recycling center.