GE 25860 - Manual (Page 23)

23
Chain Dialing from Memory
Use this feature to make calls which require a sequence of numbers, for
example, when you use a calling card to dial a frequently called long
distance number. Chain dialing lets you dial number sequences from
memory with a few button presses. The following example shows you how
to use chain dialing to make a call through a long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON by pressing the talk/callback button on the
handset.
2. Press the memory button and then press 7.
3. When you hear the access tone, press memory again, and then press 8.
4. At the next access tone, press memory and then 9.
TIP: Wait for the access tones before pressing the memory button, or your call
might not go through.
Inserting a Pause in the Dialing Sequence
Press the # pause button on the handset to insert a delay in the dialing
sequence of a stored telephone number. A pause is needed to wait for a
dial tone (for example after you dial 9 for an outside line, or to wait for a
computer access tone). Each pause counts as 1 digit in the dialing sequence.
Reviewing and Deleting Stored Numbers
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory button on the handset.
3. Use the CID-VOL (- or +) button on the handset to scroll to the desired
memory location, or use the touch-tone pad to enter the desired memory
location.
4. If you want to delete the information, press the del/chan button on the
handset while the entry displays. The display shows DELETE?
5. Press del/chan again to confirm. The display shows DELETED.