Grizzly T10222 - Manual (Page 4)

-2-
Model t10222 (Mfg. since 12/09)
iNTRODUCTiON
Tool Description
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: [email protected]
We want your feedback on this manual. If you can
take the time, please email or write to us at the
address below and tell us how we did:
Grizzly Industrial, Inc.
C /
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
Manual Accuracy
the Model t10222 router table Attachment
mounts to most table saws that have 27" deep
tables. this addition to your table saw features
a universal router mount, a 20" by 27" precision-
ground cast iron table with an extruded aluminum
fence and a starting pin for contour shaping.
the t10222 also features double-cross
3 ⁄
4
" x 3 ⁄
8
"
t-slots, an adjustable support leg, and a 2 1 ⁄
2
" dust
port.