Grizzly T10222 - Manual (Page 9)

Model t10222 (Mfg. since 12/09)
-7-
Wear safety glasses dur-
ing the entire setup pro-
cess!
This tool presents seri-
ous injury hazards to
untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations before using
this tool!
SECTiON 2: SETUp
the following are needed to complete the setup
process, but are not included with your tool.
Description Qty
• Another person .......................................... 1
• hex Wrench 3mm ....................................... 1
• hex Wrench 5mm ....................................... 1
• hex Wrench 6mm ....................................... 1
• Wrench 10mm ............................................ 1
• Wrench 13mm ............................................ 1
• straightedge (at least 24" long) .................. 1
Needed for Setup
your tool was carefully packaged for safe trans-
portation. remove the packaging materials from
around your tool and inspect the contents. if you
discover the tool is damaged, please immedi-
ately call Customer Service at (570) 546-9663 for
advice.
save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
This tool and its compo-
nents are very heavy. Get
lifting help to move heavy
items.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials unpacked with this
machine. Discard immediately.