Grizzly G0717 - Manual (Page 14)

-12-
Model g0717 (Mfg. since 9/10)
inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
figure 6. inventory.
B
C
d
e
NOTICE
If you cannot find an item on this list, check
the mounting location on the machine or the
packaging materials. Sometimes parts are
pre-installed for shipping, or they become
hidden by packaging materials.
item (figure 6) Qty
a. Bandsaw unit (not shown) ........................ 1
B. Motor assembly .......................................... 1
C. Belt Cover ................................................... 1
D. Work stop rod ........................................... 1
E. Work stop ................................................... 1
f. tool Box (not shown) ................................. 1
• phillips screwdriver #2 ........................... 1
• Flat Blade screwdriver #2 ....................... 1
• hex Wrenches 3, 4, 5, 6mm .............1 ea.
• Combo Wrenches 11/13, 17/19 .........1 ea.
• hex Bolts M12-1.75 x 65 ......................... 4
• hex nuts M12-1.75 .................................. 4