Grizzly G0717 - Manual (Page 20)

-18-
Model g0717 (Mfg. since 9/10)
power Connection
After you have completed all previous setup
instructions and circuit requirements, the machine
is ready to be connected to the power supply.
To avoid unexpected startups or property dam-
age, use the following steps whenever connecting
or disconnecting the machine.
Connecting power
figure 17. Connecting power.
1. Turn the machine power switch OFF.
2. Insert the power cord plug into a matching
power supply receptacle. The machine is
now connected to the power source.
Disconnecting power
figure 18. Disconnecting power.
1. Turn the machine power switch OFF.
2. Grasp the molded plug and pull it completely
out of the receptacle. Do not pull by the cord
as this may damage the wires inside.
NOTICE
the Model G0717 is prewired for 220v. if
you plan to operate the machine at 110v,
the motors must be rewired (see page 46)
and a 110v plug must be installed.