Motorola VT1000 User Manual
Page 21
15
VT1000 Series Voice Terminal User Guide
7
After the POWER light on your Motorola voice terminal turns on solid green, pick up
the telephone hand set and listen for a dial tone
•
If you hear a dial tone, you can now call anyone as you normally would on any
telephone.
•
If you do not hear a dial tone, check that all connections described in this
procedure are correct. If you still do not hear a dial tone, you may need to
connect a computer to your Motorola voice terminal and perform
(see page 19). If after performing Basic Configuration, you still do
not hear a dial tone, see “
” on page 26 or call your
VoIP provider.
8
Power on your router or wireless access point. Wait about two minutes for it to
start up.
9
Configure your home network, following the instructions provided with the router or
access point.