Motorola VT1000 User Manual
Page 23
Advertising
17
VT1000 Series Voice Terminal User Guide
Wait about two minutes for the Motorola voice terminal to start up. The POWER light
blinks as described in “
8
After the POWER light on your Motorola voice terminal turns on solid green, pick up
the telephone hand set and listen for a dial tone
•
If you hear a dial tone, you can now call anyone as you normally would on any
telephone.
•
If you do not hear a dial tone, check that all connections described in this
procedure are correct. If you still do not hear a dial tone, you may need to
connect a computer to your Motorola voice terminal and perform
(see page 19). If after performing Basic Configuration, you still do
not hear a dial tone, see “
” on page 26 or call your VoIP
provider.
Advertising