Motorola VT1000 - Manual (Page 28)

22
Advanced Configuration
Do not change these settings unless you have the necessary expertise and the need to
do so.
Field or Button Description
Enable DHCP/NAT
on LAN Port If this is enabled, the Motorola voice terminal automatically distributes
an IP address to a computer connected to its PC port. It is enabled by
default.
Virtual Servers Configures logical data ports for applications requiring multiple data
ports. Because NAT assumes that data sent through one port will
return to the same port, you may need to configure virtual servers to
run certain applications:
•
IP is the IP address of the computer connected to the Motorola
voice terminal
• Port sets the port to open. The ports assigned to Motorola voice
terminal voice functions are displayed. If you forward any of
these ports, you may disrupt your voice service. The ports shown
in the illustration are examples only.
• Transport sets the protocol — Disabled, TCP, IP, or UDP.