MartinLogan VENT-FREE FIREPLACE SYSTEMS 33ISDG - Manual (Page 8)

8 23D8036
REMOVING SCREEN
Remove fireplace screen by pushing screen frame panel up
and out. See Figure 2.
Figure 2 - Removing Fireplace Screen
GENERAL INSTALLATION INFORMATION
INSTALLING CANOPY
1. Remove the fireplace screen as described in the previous section.
2. Align canopy with the holes in the top frame assembly. See Figure 3.
3. Install the five (5) screws (in owner’s manual packaging) which attach the canopy to the top frame assembly. See
Figure 3.
4. Tighten all screws. Make sure the canopy is level and secure. Install the fireplace screen.
Figure 3 - Installing Canopy
Do not operate the unit without
the screen frame panel and canopy
installed.
W
ARNING
NOTE: Fireplace screen must
be removed to access log box
and to install canopy.