Mitel VX6100 - Manual (Page 41)

79
VX6100
To Voice Dial a Name From Your Contacts List
1. Flip open the phone, then press the Voice Commands Key.
2. When prompted, say "Contacts".
3. When prompted again, say a name from your Contacts list.
4. When asked to confirm, say "Yes". The phone dials the first
number listed for that Contact entry.
To Voice Dial a Number
1. Flip open the phone, then press the Voice Commands key.
2. When prompted, say "Digit Dial".
3. When prompted again, say a phone number.
4. When asked to confirm, say "Yes" . The phone dials the number.
NOTE: You should select the phone label, if the phone are stored
more than two.
78 VX6100
Using Phone Menus Using Phone Menus
Voice Commands (Menu )
Allows you to use your voice or the keypad to activate certain
features of your phone.
1. Press , , .
2. When prompted, say one of the following commands:
Contact: Reads the Contacts.
Digit Dial: Phone call is made by saying the telephone
number of 7, 10 and 11 digits.
Redial: Redials most recent phone call.
Voice Mail: Connects to Voice Mail.
Driving: Switches the hands-free driving mode on and off.
Schedule: Announces event(s) entered in your Schedule
for the current day.
Time: displays time and date, but only announces current
time.
NOTE: Voice function is recognized only in English. Spanish is not
supported. For instance, "San Jose" is not recognized as
"Sân Hó sáy" (Spanish pronunciation), but as "Sân Jó
sáy".
VX6100-(E)small.QXD 9/15/04 6:16 PM Page 78