Mitel VX6100 - Manual (Page 49)

95
VX6100
94 VX6100
Call Setup (Menu )
Allows you to designate how the phone handles incoming and
outgoing calls.
Auto Retry (Menu )
Allows you to set the length of time the phone waits before
automatically redialing a number when the attempted call fails.
1. Press , , , .
2. Use to select a setting, then press .
Off / Every 10 sec / Every 30 sec / Every 60 sec
Answer Call (Menu )
Allows you to determine how to initiate an answered call.
1. Press , , , .
2. Use to select a setting, then press .
Flip Open / Any Key / SEND only
Auto Answer (Menu )
Allows you to set the number of rings before the phone
automatically answers a call. This feature is intended for use
with hands free devices, but is an independent feature of the
phone and must be manually turned on/off when connected or
disconnected from the device.
1. Press , , , .
2. Use to select a setting, then press .
Off Auto Answer is not activated.
After 5 sec
When an incoming call is received, the
phone automatically responds after 5
seconds (whether the flip is open or not).
Using Phone Menus Using Phone Menus
Erase Contacts (Menu )
Allows you to erase all of your Contacts at once.
1. Press , , .
2. Enter the four-digit lock code.
3. Press Erase Contacts.
4. Press Erase all #s to confirm that you want to
erase all information in your Contacts or press
Cancel to exit without erasing.
Reset Default (Menu )
Allows you to reset your phone to the factory default settings.
1. Press , , .
2. Enter the four-digit lock code.
3. Press Reset Default.
4. Read the screen message, then press .
5. Press Revert to change your phone settings back to
the factory defaults or press Cancel to exit without
changing.
NOTE: If you choose to revert, the phone will turn itself off, then
back on again.
VX6100-(E)small.QXD 9/15/04 6:16 PM Page 94