Microtek CX4 User Manual
Page 14
DVI
DVI Cable
Data Projec tor
DVI Source
Connecting To A Notebook
Before connecting this projector to a notebook, make sure that both machines
have the power shut off.
1.
Connect either end of the Computer Cable to the Computer In port of the
projector, then connect the other end of the Computer Cable to the Monitor
Out port of the notebook.
If the functions of the wireless mouse on the Remote Control need to be operated,
please make the connections to each signal cable according to the steps
numbered 2~ 3 below:
2. Connect
the
Control Cable to the Control port of the projector.
3. Connect
the
PS/2 Mouse connector of the Control Cable to the PS/2 mouse
port of the notebook.
You may connect your computer to the USB interface of the projector so to enable
the function of the wireless mouse on the remote control. Please follow the step
numbered 4 for connection.
13