Replacing the projector lamp, The steps of replacing a lamp – Microtek CX4 User Manual
Page 42
6.
The cleaning process is finished at this moment. Please follow the
proper operations indicated in this manual when using this projector.
Replacing The Projector Lamp
A new lamp should be replaced according to the following conditions:
Replace the lamp when the image displayed by this projector seems
too dark or too dim.
When the Red and Orange Indicator LED of this projector blinks
alternately, this indicates that the lamp life is going to end soon.
When the Red Indicator LED of this projector is lit, it means the lamp
life of this projector has been exhausted.
Please contact the dealer of this projector for purchasing a new lamp.
The Steps of Replacing a Lamp
Warning: Have the lamp cool down before replacing it, or the hot lamp will
burn you severely.
41