MITSUBISHI ELECTRIC DX-VS1 - Manual (Page 10)

DX-VS1UE User DX-VS1UE User DX-VS1UE User DX-VS1UE User’’’’s Manual s Manual s Manual s Manual
9
2. If you monitor real time video through a CCTV monitor as well as a
PC, connect a digital recorder to ‘Video Input’ and a CCTV monitor to
‘Video Output.’ And place the left-hand side DIP switch at lower posi-
tion ‘OFF’ (the side of ‘HI-Z’). CCTV monitor is set as termination of
the video signal.
The right-hand side DIP swith is not available.
Video signal flows via
BNC cable.
PC
Digital Video
Recorder
Video signal flows via
LAN cable
CCTV Monitor
Video signal flows via
LAN cable
PC
Digital Video
Recorder
Video signal flows via
BNC cable