MITSUBISHI ELECTRIC DX-VS1 - Manual (Page 24)

DX-VS1UE User DX-VS1UE User DX-VS1UE User DX-VS1UE User’’’’s Manual s Manual s Manual s Manual
23
(3) Advanced Pan/tilt/zoom Configuration
You can register preset points and set
mode.
When you register preset, you should
stop other users from controlling pan/
tilt/zoom mechanism.
For controlling Pan/tilt/zoom mecha-
nism, please refer to Chapter IV “Ac-
cessing DX-VS1UE Homepage &
Monitoring Real-time Image.”
New Preset
You register a new preset point as follows. You can reg-
ister up to 64 presets.
! Focus on a certain point to register as a preset point
controlling Pan/tilt/zoom mechanism.
! Click a “New Preset” button, then a dialog box “New
Preset” appears.
! Select a number from 1 to 64
! Set the preset name.
! Click “Add/Change” button
! In “Current Preset List” panel, you may view preset points
that are registered currently. At the bottom of this win-
dow, you can check if the selected number is occupied or
not.。
New Group
You can make a new group by combining registered pre-
sets. You can make up to 6 groups. Each group can store
up to 64 points. The procedure for making the group is as
follows.
! Click “New Group” button, then a dialog box “New
Group” appears.
! Select a number from 1 to 6.
! Set the group name.
! Set interval time. This value is the time interval be-
tween when a camera gets to one preset point and
when the camera starts to move to the next preset
point.You should set sufficient time so that you can
monitor image.
! List proper preset point among registered ones in
“Current Group Member.” According to the order
that you listed in a group, a external camera travels.
! Click “Add/Change” button
! In “Current Group Member” panel, all registered pre-