MITSUBISHI ELECTRIC DX-VS1 - Manual (Page 29)

DX-VS1UE User DX-VS1UE User DX-VS1UE User DX-VS1UE User’’’’s Manual s Manual s Manual s Manual
28
cording to preset conditions on the “Application Configuration” page and “Alarm Configuration”
page. If event keeps arising, DX-VS1UE sends images without duplicating regardless of overlapped
time setting. The resolution of the image is fixed as 360x243.
※ Depending on the load condition of network or server, there is the possibility that fewer pic-
tures are transmitted than usual.
(3) Alarm Preset
This is used to match any preset point to one of external sensor. If you enable this function and
match a certain preset with an external sensor, the subject of the connected camera moves to the
preset point.
11) Customizing
This page is used to customize TCP ports of data transmission and design of the login pages.
(1) Web Server TCP Port
Administrator assigns a web server
TCP port for user access to DX-
VS1UE and data transmission from
DX-VS1UE. 80th port is assigned as
the default value.Please note that it
becomes impossible to access the
homepage of DX-VS1UE in normal
method if you change the web server
TCP port.
(2) Video Server TCP Port
Administrator assigns a video server
TCP port through which DX-VS1UE transmits images to users. 8080th port is assigned as the de-
fault value.