Micronics PENTIUM PRO W6-LI - Manual (Page 40)

W6-LI System Board Manual
Chapter 4: The BIOS Setup Utility
38
Type
This category selects the drive type installed in the system.
The options are Auto (default), 1-39, User and None. If
Autotype Fixed Disk does not find your drive’s param-
eters, fill this information in manually under the User
category. This information may be in the manual which
came with your system. If not, contact your dealer or the
hard drive manufacturer to fill in this category. If you are
using a SCSI hard drive, select None and refer to the
documentation which came with the SCSI adapter.
Multiple-Sector Transfers
This category determines the number of sectors per block
for multiple sector transfers. The options are Disabled
(default), 2 Sectors, 4 Sectors, 8 Sectors and 16 Sectors.
Figure 4-3: IDE Device Submenu