Micronics PENTIUM PRO W6-LI - Manual (Page 56)

W6-LI System Board Manual
Onboard Sound: Creative Labs VIBRA 16CL (optional)
Fast SCSI: Adaptec 7880 Fast SCSI Bus Mastering controller
(optional) Resident 50-pin SCSI connector
Resident 68-pin SCSI connector (Ultra Wide
SCSI).
Cache: 16K Level 1 Write Back on CPU chip
256K/512K Level 2 cache in CPU package
I/O Ports: Two high speed serial ports (16550 compatible)
Enhanced Parallel Port with ECP and EPP support
Two USB connectors (optional)
Floppy Port: Auto-detection and support of two floppy drives
(2.88MB, 1.44MB, 1.2MB, 720K, 360K).
PCI IDE Ports: Mode 4 IDE
Two resident 40-pin IDE connector
Multiple sector transfer support
Auto detection of add-in IDE board
Environmental Specifications
The environment in which the W6-LI is located is critical. Micronics
recommends the following environmental specifications:
Temperature Range
Operating: 50 to 104 degrees Fahrenheit (10 to 40 degrees Celsius).
Non -Operating: 50 to 140 degrees Fahrenheit (10 to 60 degrees
Celsius). Shipping: -22 to 140 degrees Fahrenheit (-30 to 60 degrees
Celsius).
Relative Humidity
Operating: 20% to 80%.
Non-Operating: 5% to 90%.
Appendix A: Technical Information
54