Receiving digital individual calls, Receiving unacknowledged individual calls, Ad entry – Midland Radio P25 User Manual
Page 43
Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
34
4.2.3
Receiving Digital Individual Calls
Individual calls are addressed to a single unit ID rather than a talk group. This radio is
capable of receiving both unacknowledged and acknowledged indvidual calls.
4.2.3.1
Receiving Unacknowledged Individual Calls
When an unacknowledged
individual call is received,
the radio will enter
individual call mode. The
radio will automatically use
the received source ID as
the destination ID in
individual call replies.
If no signal is received and PTT is not pressed for ten seconds, individual
call mode will time out.
Press PTT
to reply to
individual
call
Individual
call time out
(after ten
seconds)
Figure 4.34 – Receiving unacknowledged individual call