Midland Radio P25 - Manual (Page 49)

Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
40
4.2.7 Receiving a Digital Call Alert
A call alert is normally used as a low priority
request to return the call when it’s more
convenient. When a call alert is received the
radio will display the unit ID of the initiator.
4.2.8 Transmitting a Digital Call Alert
Repeatedly press the (pound) key until
“CALL ALERT:” is displayed. Enter
the destination ID or press the left
soft key for INDEX. Press the left
soft key (SEND) to send the call
alert. The radio will send up to four
call alert requests.
Call alert
transmissions may
be disabled in radio
programming.
Figure 4.41 – Receiving a call alert
Press # key
until “Call
Alert:” is
displayed
Enter unit ID
or press
INDEX
Press SEND
Figure 4.42 – Initiating a call alert request
If unit ID is does
not answer