Midland Radio P25 - Manual (Page 48)

Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
39
4.2.6 Transmitting Digital Telephone Interconnect Calls
Repeatedly press the
(pound) key until
“TELEPHONE:” is
displayed. Enter the
telephone dialing digits
then press the left soft key
(CALL). The radio will send
up to four telephone
interconnect requests. If the
telephone interconnect
request is successful, the
radio will enter telephone
call mode.
Telephone interconnect calls may be disabled or the number of dial digits
may be limited in radio programming.
Press # key
until
“Telephone:”
is displayed
Enter dial
digits then
press CALL
Figure 4.40 – Initiating telephone interconnect request