Receiving acknowledged individual calls – Midland Radio P25 User Manual
Page 44
Syn-Tech III P25 Mobile Radio
OPERATION MANUAL
680-090-2041
Version 5.0
http://www.midlandradio.com
35
4.2.3.2
Receiving Acknowledged Individual Calls
When an acknowledged
individual call request is
received, you may accept or
reject the call. The initiating
radio will receive the
accepted or rejected
response. If the call is
unanswered the display will
show the missed call.
If the call is accepted the
radio will enter individual call
mode and use the received
source ID as the destination
ID in individual call replies.
If no signal is received and PTT is not pressed for ten seconds, individual
call mode will time out.
Figure 4.34 – Receiving acknowledged individual call
Press
ACCEPT to
enter
individual
call mode
Individual
call time out
(after ten
seconds)
Figure 4.35 – Missed individual call