Controls and functions, External control panel – MITSUBISHI ELECTRIC SE2U User Manual
Page 12
Introduction
8
Controls and Functions
External Control Panel
13
12
10
9
11
5 3
4
8
7
2
1
6
1.
Power (Refer to pages
17
and
18
for
more information.)
Turns the projector on or off.
2.
SOURCE (Refer to page
20
for more
information.)
Sequentially selects the input signal
RGB/YP
b
P
r
, Video or S-Video.
3.
3 Left
4.
Right
4
When the on-screen menu is not
activated, #3 and #4 function as
Keystone -/+ hot keys.
(Refer to page
19
for more
information.)
5.
5EXIT
Exits and saves the menu settings.
6.
6MENU
Turns the on-screen display control
menu on.When the on-screen menu is
activated, the #3 to #6 buttons are used
as directional arrows to select the
desired menu items and to make
adjustments. Refer to page
24
for more
information.
7.
AUTO POSITION (Refer to page
20
for more information.)
Automatically determines the best
picture timings for the displayed
image.
8.
MUTE (Refer to page
21
for more
information.)
Used to hide the screen image and
disable the audio. You can press Mute
again to bring the image and audio
back.
9.
POWER indicator light
Lights up or flashes when the projector
is under operation.
10. TEMP (Temperature) warning light
(Refer to page
34
for more informa-
tion.)
Flashes red if the projector’s
temperature becomes too high.
11.
LAMP indicator light (Refer to page
32
for more information.)
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
12. Zoom ring
Adjusts the size of the image.
Rotate clockwise to enlarge the image
or rotate counter-clockwise to make
the image smaller.
13. Focus ring
Adjusts the focus of the projected
image.