MITSUBISHI ELECTRIC SE2U - Manual (Page 17)

Connection 13
Important:
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source is turned on and operating cor-
rectly. Also check that the signal cables have been connected correctly.
Connecting to Display Devices
If you want to monitor your presentation close-up on a monitor as well as on the screen, you
can connect the COMPUTER output port on the projector to an external monitor with a
VGA cable.
Audio cable
Video cable
Video devices
(Ferrite core)
AUDIO
VIDEO
VGA cable
COMPUTER OUT RGB